Electronic Theatre Controls Source Four Revolution Manuale Utente

Copyright © 2008 Electronic Theatre Controls, Inc.All Rights reserved.Product information and specifications subject to change.Part Number: 7060M1200-

6 Source Four User ManualShaping the beamThe beam can be shaped using the shutters (see Figure 1), a pattern, an optional drop-in iris, or by rotating

7Step 4: Slide the slot cover back toward the shutters until it meets the iris handle. Leave enough space to move the iris handle.Step 5: Secure the d

8 Source Four User ManualAdjusting the yoke positionThe Source Four provides multi-positioning capabilities within its yoke for overall fixture height

9Cleaning Lens and ReflectorReplace lenses if they contain visible damage (cracks or deep scratches) that may impair their effectiveness.Cleaning 14°,

10 Source Four User ManualStep 9: Set the lens back in the lens tube with the ridged side facing the front of the tube. Reinstall the lens brackets.St

11

Corporate Headquarters  3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA  Tel +608 831 4116  Fax +608 836 1736London,

ETC intends this document, whether printed or electronic, to be provided in its entirety.

iETC®, Emphasis®, Expression®, Insight™, Imagine™, Focus™, Express™, Unison®, Obsession® II, ETCNet2™, EDMX™, Source Four®, Revolution®, Sensor®, and

ii

1Basic AssemblyWARNING:Please note the following safety warnings before use:Do not mount the fixture on or near combustible surfaces.Do not operate th

2 Source Four User ManualFixture informationHPL lamp tableColor frame holderThe color frame holder is equipped with a spring-loaded retaining clip tha

3Step 2: Insert the color frame.Step 3: Lock the retaining clip by pushing sideways while gently pushing forward.For maximum gel life with specific le

4 Source Four User ManualReplacing the HPL LampA lamp must be installed before you use the fixture.Step 1: Disconnect power to the Source Four before

5AdjustmentsCentering lamp and adjusting the fieldThe two concentric knobs located on the lamp housing allow you to align the lamp and adjust its fiel